BendPak HD-9XW 4-Post Car Lift 9,000 Lb. Capacity, High, Standard Width - 5175863

You Don’t Last In This Industry Without Consistently Setting Yourself Above The Rest In The Way You Treat People. That’s Why We’re Always Willing To Go The Extra Mile—or Ten, Or Twenty—to Make A Customer Feel Satisfied They Chose Bendpak.

The HD-9XW is a standard width, extra-tall lift that offers ample overhead clearance and enough side room to park light-duty trucks, SUVs and virtually all low ground-clearance vehicles.

See Features Below:

The ​Four-Post Lift with Standard Width and Extra Height

When your garage isn’t cramped for space, you have more lifting options. The HD-9XW is made for the garage with a generous ceiling height, so high-rise vehicles can park on the lower level. Unlike our narrow-width HD-9ST four-post lift, this model comfortably holds wide-body trucks and SUVs without you having to worry about scratching up the mirrors or doors. With 82” of rise out of the runways, you can lift those heavy machines higher, leaving more room for taller mechanics to operate underneath. There’s also more room to park high-clearance trucks and SUVs. This eliminates the disappointment of buying a new lift and discovering your taller vehicle won’t even fit underneath.

The only way to get more width than this is to check out BendPak’s HD-9SW, a super-wide lift. We’re proud to be able to say the HD-9XW is arguably one of our most versatile and user-friendly lifts for serious DIY’ers and shop owners. The extra ceiling clearance you need means this car lift is generally the found as the property of daily wrenchers with dedicated service garages.

However, if you’re just looking for vehicle storage and want ample space for your lower-level vehicle, this lift is an ideal choice. The HD-9XW is completely certified according to the ANSI/ALI ALCTV-2011 standard. That’s why this lift is seen in shops nationwide and across the globe. There’s no “safer” car lift rating, and only BendPak offers that quality and many other built-in safety features (slack-cable locks, single-point lock release, non-slip runways, magnificent power coat finishing, etc.) with a warranty so good, we trademarked it!

Capacity

Lifting Capacity*9,000 lbs. (4,082 kg)*Max Capacity / Front Axle4,500 lbs. (2,041 kg)*Max Capacity / Rear Axle4,500 lbs. (2,041 kg)

Rise

A - Min. Runway Height:4.5" (114 mm)B - Max. Rise:82" (2,083 mm)C - Max. Lifting Height:86.5" (2,197 mm)Time to Full Rise:50 seconds

Outside Dimensions

D - Overall Width:110.25" (2,800 mm)E - Outside Length:198" (5,029 mm)F - Overall Length:224" (5,690 mm)G - Height of Columns:100" (2,540 mm)

Inside Dimensions

H - Width Between Columns:100.25" (2,546 mm)I - Drive-Thru Clearance:86.5" (2,197 mm)

Runways

J - Runway Width:19" (483 mm)K - Length of Runways:188" (4,775 mm)L - Width Between Runways:37.5" (953 mm) or 44.375" (1,127 mm)M - Runway Centerline:56.5" (1,435 mm) or 63.375" (1,610 mm)N - Outside Edge of Runways:75.5" (1,918 mm) or 82.375" (2,092 mm)

Minimum Wheelbase

Rated Capacity:135" (3,429 mm)75% Capacity:115" (2,921 mm)50% Capacity:95" (2,413 mm)25% Capacity:80" (2,032 mm)

Locking

Locking Positions:15Lock Spacing:Every 4" / 102 mm

Power Unit

Motor:220 VAC / 60 Hz. 1Ph.Noise:45 dB

Shipping

Weight:1,798-lbs. (815.6 kg)Dimensions:192'' x 21'' x 34'' (4,877 mm x 533 mm x 864 mm)

• BendPak HD-9XW User Manual

• BendPak HD-9XW Sales Sheet

• BendPak HD-9XW Warranty

 

Order shipment preparation takes 3 days. Once shipped orders usually take 2 weeks to be delivered. These are estimations; delivery can be delayed for reasons beyond our control. You can always contact us to know the exact delivery time once you placed an order with us. Have a look at our shipping policy here.