BendPak HD-9SW 4-Post Car Lift 9,000 Lb. Capacity, Super Wide - 5175023

You Don’t Last In This Industry Without Consistently Setting Yourself Above The Rest In The Way You Treat People. That’s Why We’re Always Willing To Go The Extra Mile—or Ten, Or Twenty—to Make A Customer Feel Satisfied They Chose Bendpak.

To accommodate super-wide vehicles on a 9,000-lb. capacity four-post lift, choose the HD-9SW. The “SW” stands for super-wide, and it’s the ideal four-post lift to double your parking and/or service wider vehicles.

Take Home a Super-Wide ​Four-Post Lift

There are thousands of vehicle types out there, and some come a bit wider than others. That’s no sweat for the HD-9SW, a four-post lift that sits fat and happy when it holds vehicles with wider frames. Plus, if you need a lift that offers truly gigantic proportions, the HD-9SWX is one heck of a choice. If your vehicles are tall, heavy and wide, and they need to be stacked or serviced, we can probably lift them. Both models are perfect for a “wide” range of vehicles.

With all the same great parts and components as the HD-9, our super-wide lift is equally safe and efficient. Check out the working parts and components below to see what makes a BendPak better than the rest, no matter what height/width modifications we make for your pleasure and convenience.

Dual-hub cable sheaves

Single-hub cable sheaves represent the cost-cutting way to make a car lift. Not our way. BendPak double-hub sheaves reduce friction against the cables while also extending the life of the lift axles.

Multi-level locking positions

Multiple lock positions permit operators to safely stop the lift at the right height for them, or simply adjust to the right height for the job. This is also useful for parking vehicles under the raised lift. Depending on the height of your vehicle(s), and depending on your ceiling height, you can adjust the lock position.

Heavy-duty aircraft cable

Four lifting cables help ensure a level rise. Each is constructed from high-grade stainless steel and rated to handle 14,000 lbs. Combined, the four cables can hold 640% more than this four post lift’s rated capacity. Of course, the cables are tucked away into the lift structure. This streamlines the lift design and maintains the sleek look of your shop. It also protects the cables from environmental damage, spills, etc.

Electric-hydraulic power system

The electric-hydraulic power system is totally maintenance-free. Controls are ergonomically placed and easy to use, so you’re totally at ease while operating the lift.

Large base plates

10" x 12" base plates can be bolted down or left unbolted. We encourage you to work in a way that’s best for you.

Integrated design

All moving components are located within the structure. This isn’t just about looks (although it certainly helps with that too). The integrated design addresses a major safety concern: externally routed components are exposed to additional dangers and damages. BendPak avoids these altogether.

Low-deck runways

The runways on this BendPak four-post lift rise just 4.5" off the ground. Add the gently inclining ramps, and you can lift virtually anything.

Longer approach ramps

Not only are our runways low-profile, we extend them farther than others in the industry. This makes for a car lift that can load sports cars and other low-standing vehicles without damaging them.

Automatic safety locks

Engaging the locks is as simple as raising the ramps just past the lock (you’ll hear it click as it passes) and lowering them back on the lock. Check to make sure all locks are on the same position—safety first, after all. And that’s all there is to it! Your four-post lift can be held in that position indefinitely.

Capacity

Lifting Capacity*

9,000 lbs. (4,082 kg)

*Max Capacity / Front Axle

4,500 lbs. (2,041 kg)

*Max Capacity / Rear Axle

4,500 lbs. (2,041 kg)

Rise

A - Min. Runway Height:

7" (178 mm)

B - Max. Rise:

70" (1,778 mm)

C - Max. Lifting Height:

77" (1,956 mm)

Time to Full Rise:

55 seconds

Outside Dimensions

D - Overall Width:

202" (5,131 mm)

E - Outside Length:

174" (4,420 mm)

F - Overall Length:

200" (5,080 mm)

G - Height of Columns:

90" (2,286 mm)

Inside Dimensions

H - Width Between Columns:

192" (4,877 mm)

I - Drive-Thru Clearance:

178" (4,521 mm)

Runways

J - Runway Width:

19" (483 mm)

K - Length of Runways:

164" (4,166 mm)

L - Width Between Runways:

37" (940 mm) or 42" (1,067 mm)

M - Runway Centerline:

56" (1,422 mm) or 61" (1,549 mm)

N - Outside Edge of Runways:

75" (1,905 mm) or 80" (2,032 mm)

Minimum Wheelbase

Rated Capacity:

115" (2,921 mm)

75% Capacity:

100" (2,540 mm)

50% Capacity:

85" (2,159 mm)

25% Capacity:

70" (1,778 mm)

Locking

Locking Positions:

14

Lock Spacing:

Every 4" (102 mm)

Power Unit

Motor:

220 VAC / 60 Hz /1 Ph

Noise:

45 dB

Shipping

Weight:

2,752-lbs. (1,248.3 kg)

Dimensions:

219'' x 21'' x 42'' (5,563 mm x 533 mm x 1,067 mm)

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

BendPak HD-9SW User Manual
BendPak HD-9SW Sales Sheet
BendPak HD-9SW Warranty

Order shipment preparation takes 3 days. Once shipped orders usually take 2 weeks to be delivered. These are estimations; delivery can be delayed for reasons beyond our control. You can always contact us to know the exact delivery time once you placed an order with us. Have a look at our shipping policy here.