BendPak HD-973PX Tri-Level Parking Lift 9K & 7K Capacity, Extended, High, SPECIAL ORDER - 5175267

You Don’t Last In This Industry Without Consistently Setting Yourself Above The Rest In The Way You Treat People. That’s Why We’re Always Willing To Go The Extra Mile—or Ten, Or Twenty—to Make A Customer Feel Satisfied They Chose Bendpak.

Supersize your parking capacity with this revolutionary tri-level parking lift from BendPak! This unique four-post parking lift design parks up to three vehicles in one space, instantly tripling your parking capacity. With an extended length and taller rise compared to the HD-973P, the HD-973PX has even more room for your longest and boxiest vehicles.

The longer, higher triple decker

This rugged design is ready for installation indoors or outdoors, instantly tripling your parking and storing capability. The easy to use top-of-the-line design ensures that your vehicles are being lifted safely, and efficiently. Which saves you time, and worry. The safety features that come standard with any BendPak lift make sure your cars stay in the air until YOU move them, and intuitive design cycles through the cars at the push of a button. With the HD-973PX you’re getting a lift that can not only park your taller and longer vehicles, but fits comfortably and safely wherever you need it most.

Proprietary design

Shortened height columns allow this car lift to fit in low ceiling spaces where others systems can’t. Although shorter in stature than most tri-level systems, the lower space still yields a full 70 inches of rise.

Hydraulic power

A powerful hydraulic cylinder is enclosed underside each platform set and is matched with high-strength lifting cables for simplicity and dependability. The lift can be configured for drive-thru operation, allowing as many as three deep for maximum efficiency and better use of space.

Smarter construction means less cost to you

High-rise parking lifts that can fit three vehicles will inevitably cost more than other lifts. There's simply more steel involved, and larger lifts require additional engineering, all of which gets incorporated in the cost. The HD-973PX offsets much of that extra cost because its smart design requires less steel. The end result is an incredibly efficient parking lift that actually saves buyers thousands of dollars while upholding the industry's most rigid safety standards.

Weight-displacing base

Specially designed base frames distribute the load, which makes this unique lifting system suitable for installation on virtually any residential or commercial concrete floor. It can even be installed on asphalt when equipped with concrete footers. The HD-973PX may be configured as a stand-alone lift or combined into rows of multiple units.

Who should get this parking lift?

Explore the HD-973PX if you need to stack three vehicles in a tight space, or if you want the versatility to vary the parking heights of your second and third-level vehicles. The lift's small footprint and exemplary design makes for an ideal lifting solution in both professional shops and home garages.

Style:

Multi-Level Parking Lift

Top Platform

Lifting Capacity*

7,000 lbs. (3,175 kg)

*Max Capacity / Front Axle

3,500 lbs. (1,588 kg)

*Max Capacity / Rear Axle

3,500 lbs. (1,588 kg)

A - Overall Width

112" (2,84​9 mm)

B - Overall Length

252.25" (6,409 mm)

C - Height of Columns

​173" (​4,398 mm)

D - Drive-thru Clearance

87" (2,201 mm)

E - Maximum Rise

151.5" (3,​849 mm)

F - Maximum Lifting Height

156.5" (3,972 mm)

G - Distance Between Columns

100" (2,546 mm)

H - Runway Width

19" (482 mm)

I - Width Between Runways

44" (1,121 mm)

J - Runway Length

199" (​5,056 mm)

Min. Wheelbase @ rated Capacity¹

1​40" (3,​556 mm)

Min. Wheelbase @ 75% Capacity¹

1​20" (​3,084 mm)

Min. Wheelbase @ 50% Capacity¹

​100" (2,​540 mm)

Min. Wheelbase @ 25% Capacity¹

80" (2,032 mm)

Locking Positions

3​4

Locking Spacing

Every 4" (102 mm)

Lifting Time to Max. Rise

90 seconds

Motor

220 VAC / 60 Hz / 1 Ph

Bottom Platform

Lifting Capacity*

9,000 lbs. (4,082 kg)

*Max Capacity / Front Axle

4,500 lbs. (2,041 kg)

*Max Capacity / Rear Axle

4,500 lbs. (2,041 kg)

A - Overall Width

112" (2,842 mm)

B - Overall Length

252.25" (6,409 mm)

C - Height of Columns

245" (6,227 mm)

D - Drive-thru Clearance

90.25" (2,2​95 mm)

E - Maximum Rise

​82.25" (​2,088 mm)

F - Maximum Lifting Height

87.25" (​2,211 mm)

G - Distance Between Columns

100" (2,546 mm)

H - Runway Width

19" (482 mm)

I - Width Between Runways

44" (1,121 mm)

J - Runway Length

186.75" (4,​744 mm)

Min. Wheelbase @ rated Capacity¹

1​35" (3,​429 mm)

Min. Wheelbase @ 75% Capacity¹

1​15" (2,​921 mm)

Min. Wheelbase @ 50% Capacity¹

​95" (2,​413 mm)

Min. Wheelbase @ 25% Capacity¹

7​5" (1,​905 mm)

Locking Positions

1​6

Locking Spacing

Every 4" (102 mm)

Lifting Time to Max. Rise

50 seconds

Motor

220 VAC / 60 Hz / 1 Ph

¹The Lift supports less weight than its rated capacity when the vehicle’s wheelbase is shorter; this is because the wheels of such a vehicle are closer to the middle of the Runways, where there is less strength. For example, the maximum weight allowed on the Lift for a vehicle with a wheelbase of 95" is 50 percent of the Lift’s rated capacity (or 3,500 lbs. when the rated capacity is 7,000 lbs.).

Patent Pending - Applied for in the U.S. and Abroad

Note: An air supply (minimum: 30 psi / 3 CFM) is may be required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

Order shipment preparation takes 3 days. Once shipped orders usually take 2 weeks to be delivered. These are estimations; delivery can be delayed for reasons beyond our control. You can always contact us to know the exact delivery time once you placed an order with us. Have a look at our shipping policy here.