Aims Power KIT Hybrid Inverter Charger & Solar Panels 9.6 kW Inverter Output, 9900 Watts Solar Panels - KIT-HY96SOL

At Aims Power, We’re Passionate About Designing And Developing Off-grid And Renewable Energy Solutions.

The NEW REVOLUTIONARY AIMS Power Hybrid Inverter gives you total control of your power. It combines solar power and battery backup into one complete, easy to use solution, that provides FREE power and independence from the grid. In addition, the AIMS Power Hybrid Inverter can reduce or eliminate electric bills, provides power during outages, and allows customers to monitor their system from anywhere.

With the easy to use digital touch screen display, the hybrid inverter can be set up using the following simple modes for your convenience:

• Self-Use – The panels will power the electrical loads first, for FREE and any excess energy is then used to recharge a battery bank. The remaining energy will go back to the grid.

• Selling First – The panels will power the loads first and any excess energy will go back to the grid.

• Charge First – The panels will charge the battery bank first and any excess energy will then power the electrical loads for FREE. The remaining energy will go back to the grid. This setting will also allow you to use solar and grid to recharge the batteries if the solar panels can’t produce enough power to charge the batteries.

We have added a huge solar array, quantity 30 of 330 watt panels, totaling 9900 watts of solar power. Keep your items powered by the sun, for FREE using this solar panel and hybrid inverter for grid tie, net metering, load share and charging a battery bank (if using batteries for off grid). For more information see features and specification tabs.

See Features Below:

Included Components

• Hybrid inverter charger – Qty 1

• Solar panels 330 watts – Qty 14 for 4.6kw kit and qty 30 for 9.6kw kit

• PV wire – 2 sets 100FT MC4 male to bare end and MC4 female to bare end – solar panels to inverter

Hybrid Inverter Features

•     Listed to UL 1741-SA I CSA 22.2 No.107-01 I UL1998 I UL1699B

•     Stackable (Max 6)

•     Direct 3 string PV input

•     IP65 NEMA4X rated for outdoor installation

•     10 year warranty

•     Customizable DC input voltage for various battery types including lithium and lead

•     Free USA based tech support

•     Wide programmable voltage input range

•     Generator input for backup 240VAC

•     Wide PV input voltage range

•     Load sharing

•     Isolated emergency backup output for defined loads

•     Configurable charge and load times based on local utility recommendations

•     Loaded with safety features

•     Large 5-inch color LCD

•     RS485, CAN, Wi-Fi, 4G

•     Extremely efficient

•     FCC Part 15 Class B

Solar Panels

• Maximum power (Watt): 330 Watt

• Optimum power voltage (Vmp): 33.9 volts

• Optimum operating current (Imp): 9.73 amps

• Open circuit voltage (Voc): 41.5 volts

• Short circuit current (Isc): 10.22 amps

• Solar cell: 158.75 * 158.75 mm mono

• Number of cells (pcs): 6*10

• Front glass thickness (mm): 3.2 mm

• Temperature coefficients of Isc (%) C: -.048

• Temperature coefficients of Voc (%) C: -0.29

• Temperature coefficients of Pm (%) C: -0.37

• Temperature range: -40C to +80C

• Tolerance wattage: 0-3 watts

• Surface maximum load capacity: 6000Pa

• Allowable hail load: 45mm at 30.7m/s

• Bypass diode rating (A): 10

• Cell efficiency (%): 21.47%

• Module efficiency (%): 19.78%

• Warranty: 91.2% of 12 years, 80.6% of 25 years

• Standard test conditions: AM1.5 1000W/m 25 +/-2C

• FF (%): 70-76%

• Cable length on solar panel – 41″

• Dimensions of module (inches): 65.35 x 39.37 x 1.4

• Weight per panel (lbs): 39.7 lb

Order shipment preparation takes 3 days. Once shipped orders usually take 2 weeks to be delivered. These are estimations; delivery can be delayed for reasons beyond our control. You can always contact us to know the exact delivery time once you placed an order with us. Have a look at our shipping policy here.